All the blocks, both front and back, are the same size and ready to be assembled into strips. The quilting has been done in a sort of spiral pattern.
The sashing on the front is 1 1/4 " wide in Kona Ash and the sashing on the back (Kona Snow) needs to be bigger, so I cut it to 1 3/4 ".
I pinned the 3 layers together with the Ash on the front.
... and the Kona Snow on the back.
and here is the triple sandwhich pinned together.
now I sew along the edge with a proper seam allowance.
then I pin the other side of the Ash sashing on the top to the edge of the next block and sew along the edge again.
turning the two attached blocks over looks like this.
and this it what is looks like on the back.
now I fold over the Snow sashing on the back along the seam and iron it flat.
and then I fold it over again to cover the seam on the next block.
pin the 3 layers together to fix the sashing on the back in place.
and I sew closely to the edge to attach the back sashing firmly.
the I sew along the other edge to make sure it looks even.
et Voila. this is what the 2 QAYG blocks look when attached this way.
on the the top
and the back.
I hope this makes sense.
Love, Nadine
Are there noticeable spaces in the batting between the blocks? Or do they get butted up close enough that you can't tell?
ReplyDeleteNO, there are no spaces. That's why I am being very careful with the seam allowance. it is not visible that it's a QAYG project. when you feel very carefully between the blocks you might find the edges of the blocks, but the sashing is thin enough and sewn on tight that the blocks are fixed closely.
ReplyDeleteAusgesprochen schoen und edel! The quilts make me want to go and snuggle up with a good book. I think you are an extremely talented lady! Keep up the outstanding designs and colour schemes! Lurve 'em! Ulli xx
ReplyDeleteThanks so much for this tutorial. I've read through lots of tutorials on how to attach QAYG blocks, but this method definitely looks like the best.
ReplyDelete